NevCAN: Nevada Climate-ecohydrological Assessment Network

From Earth Science Information Partners (ESIP)
Revision as of 13:12, April 22, 2014 by Rfbrown (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

back to Sensor Data Acquisition main page


Several “full-service” climate stations were installed for purposes of establishing long-term baseline environmental monitoring across the full elevational gradient in two separate mountain ranges in the Great Basin region, North America. These stations monitor meteorological, ecological, hydrological, and pedological parameters at time frequencies ranging from 10 Hz (eddy covariance) to 1 hour (site imagery). Site settings range from Mojave desert at 800 m elevation to Subalpine forest at 3300 m elevation. All stations are off-grid, remote installations on private and public lands, a minimum of 1 hour travel time from a servicing institution, with the average travel time being 6 hours. Stations are designed to provide property, power, and connectivity for baseline services as well as experimental additions. Data acquired at the stations need to be transferred to the Nevada Climate Change Portal (project Cyberinfrastructure developing data center) at UNR, and the Western Regional Climate Center (WRCC) at the Desert Research Institute-North (DRI-North).

Data acquisition options (planning)

Possible pathways for data acquisition for NevCAN include: 1) onsite technician download (seasonal); 2) unidirectional telemetry via NOAA GOES satellite; 3) bidirectional transmission via internet connectivity at local cell towers, commercial local Internet Service Providers (ISP’s), satellite Internet providers, or collaborative partners at Great Basin College (GBC), Nevada Seismological Laboratory (NSL), University of Nevada, Las Vegas (UNLV), Desert Research Institute-South (DRI-South).


NevCAN designers decided to implement a hybrid approach using all three methods, in order to diversify data flow for reliability purposes.

Final Implementation

Manual download

All stations are configured to allow local manual download via direct logger connections or local ethernet connection over the field subnet. Technicians download files in CSI XML format for later transfer to data center on an as-needed basis.

Unidirectional transmission

Stations in less-accessible locations (high-elevation) have NOAA GOES satellite transmitters installed as part of the meteorological subsystem, sending a subset of hourly data (70 values) to the Western Regional Climate Center (WRCC) where they are processed and made available for transfer to the C.I. data center.

Bidirectional transmission

All stations are interconnected using a terrestrial wireless IP network organized into locality-specific private subnets. Traffic between private subnets is managed via OSPF routing protocols over both wireless radio connections and VPN tunnels between internet-connection points. Points of internet connectivity on each subnet are connected to C.I. private subnets via VPN tunnels and OSPF protocols. Acquisition software connections from C.I. servers to field loggers and devices is real-time and seamless over these networking paths.

Hardware/process solutions

Manual download

Field laptop connections via ethernet, USB, or RS-232 protocols to portable flash memory

Unidirectional transmission

Campbell Scientific GOES TX system connected to CR3000 meteorological datalogger, WRCC GOES data import process and ASCII file export

Bidirectional transmission

  • Field internet connection points - Great Basin College campus, Nevada Seismological Laboratory field network, commercial ISP
  • Backbone field IP radios

AFAR Communications transparent TCP/IP bridge radios over 2.4 GHz (LoS) and 900 MHz (nLoS) ISM bands; antennas optimized for each link application; 10 Mbps network speed typical

  • Secondary IP radios - 5.x GHz Mikrotik Metal and Sextant router/radios, antennas optimized for link applications; 30 Mbps network speed typical
  • Onsite switching - ICP-DAS NS-208 industrial 8-port DC switches
  • Routing - Mikrotik RB433, RB493, and RB1100 routers at all subnet junctions
  • Ethernet Interfaces - Campbell NL115, Campbell NL100, Campbell NL200, direct connection if devices are IP enabled
  • Misc support hardware - low voltage disconnects, IP relays, ethernet surge protectors, shielded CAT5e and connectors
  • Repeaters/relays - standalone relay/repeater system with solar power/AFAR radio at 3300 m elevation; purchased rackspace/towerspace with Nevada Department of Information Technology for mountaintop hub/relay on grid/commercial power

Personnel/expertise solutions

  • Field electronics/datalogger/sensor subsystem specialists
  • GOES satellite approved data technician
  • IP network architect and administrator
  • Terrestrial RF network architect and technician
  • Field construction/fabrication technician


  • Short coaxial runs (install radios on towers near antennas)
  • Weatherproofing connectors (Coax Seal wrapped with Scotch 33+ electrical tape)
  • Black non-metallic paint on antenna panels and radomes accelerates de-icing
  • RF spectrum surveys on-site help identify potential interference issues
  • LVD-protected, redundant solar/battery systems increase high-elevation reliability
  • Standardized per-site IP addressing schemes critical for scalability
  • Dedicated comms enclosure for DIN-mounted power distribution and device mounting
  • Use outdoor, UV-jacketed, shielded CATx cable