Attribute Convention for Data Discovery 1-2 Working
From Earth Science Information Partners (ESIP)
Version and Status
This version is designated as Version 1.2.1 beta.
This page is under development with updated definitions.
Introduction
This page consolidates ongoing work seeking to improve the definitions in the Attribute Convention for Data Discovery (ACDD).
The first 3 sections represent the terms in the corresponding sections of the ACDD.
Modifications relative to the original text may be seen with the history mechanism of this wiki. The original definitions are marked with the Summary keyword Original Definitions.
Process
The edits will be made in this page by anyone in the community who wishes to contribute, and discussed in greater depth in the Discussion page, if necessary. (The discussion page can also be used as an archive of changes on this page, if desired.)
Once there is some consensus about one or a group of definitions, they can be migrated to the primary document and the version number of that document incremented.
Status
This summarizes the status of the terms as of 2013.10.18.
It also references the open issues in the Discussion page.
These are the major remaining issues in the document.
Attributes Without Comment
Highly Recommended: title, summary
Recommended: id, naming_authority, comment, processing_level, acknowledgment, geospatial_* (bounds, lat_min, lat_max, lon_min, lon_max, vertical_min, vertical_max, vertical_positive), time_coverage_start, time_coverage_end, time_coverage_duration, license (wording reordered) Suggested: geospatial_lat_units, geospatial_lon_units, geospatial_vertical_units, coverage_content_type
Attributes Discussed and Resolved
Recommended:
- cdm_data_type: all issues resolved, needs one last read.
- creator, creator_email, publisher, publisher_email: no issue with updates
- time_coverage_resolution: updated to specify targeted spacing (and preferred format); needs review
- standard_name_vocabulary: someone pointed out this is unnecessary; in CF the standard_name vocabulary is always CF. It's deleted.
- contributor_info: principal objections (ISO 19139) are resolved; discussion may be needed, but I think satisfactory structural encodings may be found and should be acceptable.
Suggested:
- geospatial_*_resolution (lat, lon, vertical): updated to specify targeted spacing; needs review
Attributes Under Discussion
Highly Recommended:
- keywords: use type code or pseudo-groups syntax? ok to use URI in addition to selections from a vocabulary? ok to use prefix?
Recommended:
- keywords_vocabulary: can multiple keyword vocabularies be separated by a comma and specified in keywords attribute with a prefix? (if not both, then do neither -- just use URI option in keywords)
- history: had to drop ISO 19139 expression of lineage, replaced with external reference option
- date_modified: recently discussed by Nan; description is updated per John's latest email in that thread
- creator_url, publisher url: moved to Suggested, changed to _uri, and specified to apply to person only
Suggested:
- creator_project, creator_institution, publisher_project, publisher_institution: do they help discovery enough to include?
- creator_project_info, creator_institution_info, publisher_project_info, publisher_institution_info: (deleted ISO 19139: do _they_ help discovery enough?
- date_created: recently discussed by Nan; description is updated from John's latest email in that thread
Other:
- Metadata_Conventions: changed text significantly per separate email thread; reference John's email titled Metadata_Conventions and Metadata_Link
- Metadata_Link: defined
Working Definitions
Highly Recommended
- title
- A short phrase or sentence describing the dataset; this is a NetCDF Users Guide (NUG) attribute.
- summary
- A paragraph describing the dataset, analogous to an abstract for a paper.
- keywords
- A comma-separated list of key words and/or phrases. Keywords may be common words or phrases, terms from a controlled vocabulary, or URIs for terms from a controlled vocabulary (see keyword_vocabulary below).
- Conventions
- A list of the conventions followed by the dataset; blank space separated is recommended but commas should be used if any convention name contains blanks. This attribute is defined in NUG.
- source
- The method of production of the original data. If it was model-generated, source should name the model and its version. If it is observational, source should characterize it. This attribute is defined in (CF).
Recommended
- id
- An identifier for the data set, provided by and unique within its naming authority. The combination of the "naming authority" and the "id" should be globally unique, but the id can be globally unique by itself also. IDs can be URLs, URNs, DOIs, meaningful text strings, a local key, or any other unique string of characters. The id should not include blanks.
- naming_authority
- The organization that provides the initial id (see above) for the dataset. The naming authority should be uniquely specified by this attribute.
- keywords_vocabulary
- If you are using a controlled vocabulary for the words/phrases in your "keywords" attribute, the unique name or identifier of the vocabulary from which keywords are taken. If more than one keyword vocabulary is used, each may be presented with a prefix (e.g., "CF:NetCDF COARDS Climate and Forecast Standard Names") and a following comma, so that keywords may optionally be prefixed with the controlled vocabulary key.
- cdm_data_type
- The organization of the data, as derived from the Common Data Model's Scientific Data layer and understood by THREDDS (this is a THREDDS "dataType"). One of point, profile, section, station, station_profile, trajectory, grid, image, or swath. Please note that this is different from the CF NetCDF attribute 'featureType' that indicates a Discrete Sampling Geometry file - for guidance on those terms, please see this NODC guidance.
- history
- Describes the processes/transformations used to create this data; can serve as an audit trail. Per the NUG: 'This is a character array with a line for each invocation of a program that has modified the dataset. Well-behaved generic netCDF applications should append a line containing: date, time of day, user name, program name and command arguments.' To include a more complete description you can append an ISO Lineage reference; see NOAA EDM ISO Lineage guidance.
- comment
- Miscellaneous information about the data, not captured elsewhere.
- date_modified
- The date on which the provided content, including data, metadata, and presented format, was last changed.
- creator
- The name of the person principally responsible for originating this data.
- creator_email
- The email address of the person principally responsible for the data in the file.
- publisher
- The person responsible for the data file, its metadata and format.
- publisher_email
- The email address of the person responsible for the data file, its metadata and format.
- processing_level
- A textual description of the processing (or quality control) level of the data.
- acknowledgement
- A place to acknowledge various type of support for the project that produced this data.
- geospatial_bounds
- Describes geospatial extent using any of the geometric objects (2D or 3D) supported by the Well-Known Text (WKT) format.
- geospatial_lat_min
- Describes a simple lower latitude limit; may be part of a bounding box or cube. Geospatial_lat_min specifies the southernmost latitude covered by the dataset.
- geospatial_lat_max
- Describes a simple upper latitude limit; may be part of a bounding box or cube. Geospatial_lat_max specifies the northernmost latitude covered by the dataset.
- geospatial_lon_min
- Describes a simple longitude limit; may be part of a bounding box or cube. Geospatial_lon_min specifies the westernmost longitude covered by the dataset. Cases where geospatial_lon_min is greater than geospatial_lon_max indicate the bounding box extends from geospatial_lon_max, through the longitude range discontinuity meridian (either the antimeridian for -180:180 values, or Prime Meridian for 0:360 values), to geospatial_lon_min.
- geospatial_lon_max
- Describes a simple longitude limit; may be part of a bounding box or cube. Geospatial_lon_max specifies the easternmost longitude covered by the dataset. Cases where geospatial_lon_min is greater than geospatial_lon_max indicate the bounding box extends from geospatial_lon_max, through the longitude range discontinuity meridian (either the antimeridian for -180:180 values, or Prime Meridian for 0:360 values), to geospatial_lon_min.
- geospatial_vertical_min
- Describes a numerically smaller vertical limit; may be part of a bounding box or cube. If geospatial_vertical_positive is up ('altitude' orientation), the geospatial_vertical_min attribute specifies the location closest to the earth's center covered by the dataset. If geospatial_vertical_positive is down ('depth' orientation), the geospatial_vertical_min attribute specifies the location furthest from the earth's center covered by the dataset.
- geospatial_vertical_max
- Describes a numerically larger vertical limit; may be part of a bounding box or cube. If geospatial_vertical_positive is up ('altitude' orientation), the geospatial_vertical_min attribute specifies the location furthest from the earth's center covered by the dataset. If geospatial_vertical_positive is down ('depth' orientation), the geospatial_vertical_min attribute specifies the location closest to the earth's center covered by the dataset.
- geospatial_vertical_positive
- One of 'up' or 'down'. If up, vertical values are interpreted as 'altitude', with negative values corresponding to below the reference datum (e.g., under water). If down, vertical values are interpreted as 'depth', positive values correspond to below the reference datum.
- time_coverage_start
- Describes the time of the first data point in the data set. ISO8601 format recommended.
- time_coverage_end
- Describes the time of the last data point in the data set. ISO8601 format recommended.
- time_coverage_duration
- Describes the duration of the data set. ISO8601 duration format recommended.
- time_coverage_resolution
- Describes the targeted time period between each value in the data set. ISO8601 duration format recommended.
- license
- Provide the URL to a standard or specific license, enter "Freely Distributed" or "None", or describe any restrictions to data access and distribution in free text.
Suggested
- contributor_info
- The name and role of any individuals, projects, or institutions that contributed to the creation of this data. May be presented as free text, or in a structured format compatible with conversion to ncML (e.g., insensitive to whitespace).
- date_created
- The date on which this data product came into existence (for products that grow by adding data, this value isn't changed by later additions of data).
- geospatial_lat_units
- Units for the latitude axis. These are presumed to be "degree_north"; other options from udunits may be specified instead.
- geospatial_lat_resolution
- Information about the targeted spacing of points in latitude. (Format is not prescribed.)
- geospatial_lon_units
- Units for the longitude axis. These are presumed to be "degree_east"; other options from udunits may be specified instead.
- geospatial_lon_resolution
- Information about the targeted spacing of points in longitude. (Format is not prescribed.)
- geospatial_vertical_units
- Units for the vertical axis. These are presumed to be "meter" (of depth); other options from udunits may be specified. Note that the common oceanographic practice of using pressure for a vertical coordinate, while not strictly a depth, can be specified using the unit bar.
- geospatial_vertical_resolution
- Information about the targeted vertical spacing of points.
- coverage_content_type
- Information about the content of the file, valid values are image, thematicClassification, physicalMeasurement, auxiliaryInformation, qualityInformation, referenceInformation, modelResult, coordinate.
- creator_uri
- The unique identifier of the person principally responsible for the data.
- creator_institution
- The institution that produced the data; should uniquely identify the institution.
- creator_institution_info
- Additional free text information for the institution that produced the data.
- creator_project
- The scientific project that produced the data; should uniquely identify the project.
- creator_project_info
- Additional free text information for the institution that produced the data.
- publisher_uri
- The unique identifier of the person responsible for the data file, its metadata and format.
- publisher_institution
- The institution that published the data file; should uniquely identify the institution.
- publisher_institution_info
- Additional information for the institution that published the data; can include any information as ISO 19139 or free text.
- publisher_project
- The scientific project that published the data; should uniquely identify the project.
- publisher_project_info
- Additional information for the institution that published the data; can include any information as ISO 19139 or free text.
- metadata_link
- A URI that gives the location of more complete metadata; a URL is recommended.
- Metadata_Convention
- (deprecated, supported for backward compatibility with current usage) Reference to the particular metadata convention(s) used for the described data file; recommended practice is to add the metadata convention(s) to the comma-delimited conventions list in the 'Conventions' attribute, per NetCDF Best Practices.
Mappings ACDD to other metadata dialects
http://wiki.esipfed.org/index.php/Attribute_Convention_for_Data_Discovery_%28ACDD%29_Mappings
Recommended Order of Precedence
http://wiki.esipfed.org/index.php/Attribute_Convention_for_Data_Discovery_%28ACDD%29_Precedence
